Cement in powder form can be changed from plasticity paste to hard stone-like body and can become a total cemented granular materials through physical and chemical processes after being mixed with water. So cement is a good mineral binder. Cement can be not only hardened in the air, but also better hardened in the water in which it will maintain and develop strength. So cement is kind of cementitious material which will be of stronger hardness in water. Cement mill is used for cement grinding. Cement crusher is applied for cement crushing. In cement mining, you need to choose suitable cement grinding mill and cement crusher.

Cement Plant Process
Cement industry, the rock block with a large volume of mineral particles mixed, easy to scattered and fragmentary features. One of the main material for the sandstone and shale. Sandstone and shale, sandstone and shale is a range of precipitation between the rocks. The density of 0.8 ~ 1.5t/m3, compressive strength of 160MPa, amounted to 10-15% silicon, the material due to its high hardness and high abrasion resistance, and the high cost of Cone Crusher comparison, we use Impact Crusher; limestone, when it amounted to 6-7% carbon, due to high hardness, with the single-stage hammer crusher, hammer loss of large, can only be broken nearly 20 million tons, representing a counter-type crusher broken materials, production fell by nearly half, inefficient, therefore, for low-quality limestone, we choose impact crusher.

Now, broken by the cement industry at home and abroad of machinery and equipment and application of key performance indicators of the analysis, we can see Crusher has broken than large, open great, yield advantages. To ensure efficiency and crushing performance of the simultaneous pursuit of large-scale development is also an important direction for the entire board of the material are broken grain size of the material has some influence.

Cement Crushing Plant Application
Cement PEW series jaw crushing plant is mainly used for the initial crushing of chunks cement, capacity ranging from: 50-500(t / h), the maximum feed size: 220-720(mm);

Cement HCS series hydraulic cylinder cone crushing plant is mainly used for the secondary crushing of cement, capacity ranging from: 27-660(t / h), the maximum feed size: 28-275(mm);

Cement PF series impact crushing plant has been proved that this series of crushers not only effectively increase productivity and final product quality, but also greatly reduce the investment costs and operation costs. Unmatched excellent performance is shown in the secondary crushing, tertiary crushing and material recovery. It’s capacity ranging from: 15-350(t / h), the maximum feed size: not more than 500(mm).